Let´s give a chance to Sci-Fi. This Fine Molds kit is really well detailed wich makes the paint process much easier. This work represent an Imperial Tie fighter under repair after severe damage in one of the wings. The new wing imitates an unpainted spare part so we can see the components in it´s priming color. The repair bay is made with unused pieces from old models and some scratch pieces. This time I wanted a clean look, like those hi-tech Formula 1 cars under repair where you see no dirt, so there is no need of weathering. The paint of the main ship is made with Model Air colors, a base coat of light grey and the center of the panels highlighted with white. The spare wing paint is a coat base of aluminiun, then some elements are airbrushed whith yellow clear to imitate a "brass" primer layer. Then I painted the rest of the panels and elements with a fine brush in greenish and yellowish tones to imitate other primer colors. Next I applied a protective coat of gloss acrylic varnish so I could profile the raised details and panel lines with black oil paint diluted with white spirit. The repair bay is painted the same way in an "Imperial grey" tone (some sort of blueish dark grey). The transparent film of the energy panels imitates a kind of protective cover. The satin finish is made with a mix of Model Air satin and gloss varnish.
It´s not the last time you´ll see Sci-Fi stuff in Scaleworks. Hope you enjoy it.
Diego Quijano.
It´s not the last time you´ll see Sci-Fi stuff in Scaleworks. Hope you enjoy it.
Diego Quijano.
Great job! I really like it.
ReplyDeleteCheers,
Marcin
Thanks Marcin, much appreciated.
ReplyDeleteQ
This is phenomenal work, Diego!
ReplyDeleteCheers,
Albert Moore
Diego,
ReplyDeleteExcelente trabajo, dónde conseguiste este modelo? qué marca es?
Hola Erick,
DeleteEs el Tie Fighter 1/72 de la marca japonesa Fine Molds, excelente calidad. También lo tienen a 1/48:
http://www.hlj.com/product/FNMSW-02
http://www.hlj.com/product/FNMSW-12
En las fotos el 1/72 se ve de muy buen tamaño, lo es? porque me imagino que el 1/48 puede ser ya muy grande, no?
DeleteOlvide comentar que la base es también espectacular !!!!
DeleteEs más pequeño de lo que parece en las fotos:
Deletehttp://i135.photobucket.com/albums/q158/Diego_Quijano/DiegoQuijanoTieFighter.jpg
A 1/48 a mí no me parece demasiado grande.
Un saludo
Q
Diego, mil gracias por la foto, ha sido de gran referencia, creo que me haré del 1/48, mis ojos ya no dan mucho para ir por el detalle que le diste a tu modelo. Me encantó y voy a seguir tu modelo como referencia. Ahí te contaré cómo me fue, espero llegar cerca de lo que has logrado. Saludos.
ReplyDeleteEstoy impresionado para donde vea solo hay modelismo de primara!! Felicitaciones!
ReplyDeletebuenas Noches Diego
ReplyDeletetrabajo verdaderamente espectacular, será posible decirme dónde has sacado las partes para hacer la base, saludos desde Portugal
Hi Gonçalo,
DeleteThe pieces I usedto build the grip of the base are mainly from a B-1 1/48 landing gear. It also have some scratch pieces.
Cheers.
Q
Hi Diego,
ReplyDeletestunning looking model.
I have some Star Wars kits in stock and this kit here, too.
Do you want to tell me how you made the glass like looking solar panels?
Must be more behind it than a thick layer of clear coat, I guess. :)
Best regards
Hi Thomas,
DeleteThe clear cover is just a thin clear plastic sheet from Evergreen:
http://www.facebook.com/l.php?u=http%3A%2F%2Fmfpilot.com%2F005-clear-styrene-sheet-evergreen-3-pack.html&h=0AQFLKnhG
A simple trick. :)
Q
Hi Diego,
Deletethanks for your quick response.
An easy but effective trick. Guess I will give it a try. :)
T
Hi Diego!,
DeleteIts a couple of yers since y published this project, jet its still so hot and sexy :) Can y give me some hints (unless you dont remeber)?
1) What colour did you used for the solar panels. It was just a plain black or something more complex?
2) wchta is the colour of darker grey y use around the "ball" (for eg a window frame)
3) and most important quetion how the spare wing is connected to the model. I see that you have cut of some parts of the arm holding the wing, but is strong enought to stay on its possition itself or you have to add sth to support it?
Hi Konrad,
DeleteThe solar panels are painted satin black with a soft drybrush with dark grey to enhance the grid.
I don´t remember the exact tone of grey of the ball. It is just a neutral shade of medium/dark grey.
There is a metal rod conecting the wing to the ball. It is inside that bunch of conducts you can see inside the arm.
Glad you like it mate :)
Fantastic Work, and great techniques that can be used anywhere!!
ReplyDelete